How to install a flush door
Installing flush doors may seem like a complicated and rather lengthy operation, but that is not necessarily the case. With the right techniques, it is possible to get to the bottom of the fixture installation quickly, and obtain a final effect in line with your expectations.
So here is a brief explanation of the various phases that lead to the installation of a modern flush door, ideal for the most sophisticated homes and for those looking for new ways to enhance their home.
Before starting, we would like to point out that installation videos for flush doors are available on the Porte Italiane Youtube channel, also translated into French, English and Russian.
The installation of a door flush with the wall in the masonry version
The flush doors proposed by Porte Italiane are already pre-assembled and ready for installation. This means that it is not necessary to waste time on preliminary operations which could take away precious time for the assembly of the wire door mu
After having positioned the frame in a vertical position, then, all that needs to be done is to align the clamps, and lay the door in the appropriately made compartment in the wall. It seems superfluous to say that the panel measurement phase is fundamental, because only by making a hole of adequate size is it possible to install the door in the best possible way. In fact, a compartment that is too large could undermine the structural stability of the window itself, while one that is too small would simply make it impossible to install the panel.
The next step is to level the structure. With this terminology, we mean the practice of perfectly centering the entire frame, so that the flush door is perfectly aligned with the floor and with the hole in the wall.
This first phase ends by fixing the anchors with reinforced concrete. By doing so, the necessary structural stability of the entire window is guaranteed.
Additional operations to the installation of doors flush with the wall
The installation of doors flush with the wall also sees the completion of additional operations compared to the simple installation of the frame in the opening. First, you need to refine and add . This is the newly cemented area, the one including the clamps. This step is essential to ensure further stability to the entire structure.
Once this is done, you can proceed with finishing and painting the wall around the door, which will thus become a smooth and uniform surface. Subsequently, the flush adjustment phase begins, which essentially consists in making the leaf adhere as closely as possible to the walls.
The name "filomuro", on the other hand, indicates that the door must be at the same level as the other horizontal surfaces. To do this, it is necessary to act on the adjustment screws of the 3D concealed hinges. With the help of a special key, it is sufficient to operate the position regulators, which allow you to better calibrate where the sash will be.
Touch-ups: painting and finishing of flush doors.
The last phase of the installation of the wall doors concerns the aesthetic touch-ups. In this case, the most appropriate way of acting can be followed, which can include painting the same color as the walls or a different shade.
There is no doubt, however, that the greatest effect comes from painting with the same color as the walls. A very simple technique that literally makes flush-to-wall doors "disappear". We recently had the pleasure of implementing this stylistic solution in one of our interventions in a prestigious apartment with flush doors on the Champs-ΓlysΓ©es, in the unique and charming setting of Paris.
Flush-to-the-wall door with mirror: flush-to-the-wall door, a one-of-a-kind fixture
The beauty of flush doors is that they can be declined in many different ways. And if the traditional alternatives are a functional and useful option, however, other options offer a unique charm. Among these, Porte Italiane recommends the flush door with external mirror and invisible handle.
This fixture offers all the advantages of flush-to-the-wall fixtures, including easy installation. For installation, the steps to follow are those just mentioned in this guide. The only thing that changes is the final part, since the door does not have to be painted.
Conversely, the flush mirrored door immediately creates a focal point within the room. Not to mention that, thanks to the invisible handle, it can easily be mistaken for a normal mirror, thus concealing the existence of the room that is hidden behind the frame.
An original furnishing solution available both for mounting on masonry and plasterboard walls. But the alternatives offered by our catalog certainly do not end here: for more information, do not hesitate to write your request by filling out the form included in the Contact page
WATCH THE ASSEMBLY VIDEOS:
Easy assembly of the door flush with the wall or flush with the wall
Easy assembly of the door flush with the wall or flush with the wall
Montage Porte au ras du mur Linvisibile
ΠΠΎΠ½ΡΠ°ΠΆ Π΄Π²Π΅ΡΠΈ ΡΠΊΡΡΡΠΎΠ³ΠΎ ΠΌΠΎΠ½ΡΠ°ΠΆΠ° ΠΠ°ΡΠΈΠ°Π½Ρ ΡΡΡΠ°Π½ΠΎΠ²ΠΊΠΈ Π² ΡΡΠ΅Π½Ρ
